All certified safes weighing less than 1.000 kg must be equipped with an option to install an anchoring device according to EN1143-1. Wertheim equips all safes with ground anchoring. Safes in grade I to III (except type CWS) have an additional anchoring alternative in the rear wall. Certified safes weighing less than 1.000 kg are delivered with 1 pc. anchoring material.
For ground floor anchoring (preferably on a load bearing concrete ground floor – a floor anchoring on a stone or clay floor is insufficient), make sure that there is no tubing or wiring below or behind the chosen area.
For full insurance cover show your insurance the filled conformity declaration (included in delivery). To guarantee a proper anchoring, we recommend to order trained staff for mounting safes.
Please note, that a wall mounting (cantilever) is no standard. This request must be mentioned in the order.
Additional anchoring holes
(not possible for all safe models - see data sheets)
There is the possibility to prepare additional to the standard holes further anchoring holes on customer specified position (side wall, rear wall, ceiling, floor).
Note: Take care of possible equipment when choosing the position of special holes (especially in the sidewall).
1 pc. anchoring material is included in delivery. If more anchors are required, this must be mentioned in the order.